*** M E M O R U M ***

Hi Mark,

I'll include your free sample with the two you were going to buy . . . .

Oh, I forgot to mention, the price has gone up by 50%

So, my first forray into PCB manufacture seems to have been a success . . . . One small "glitch", Martin spotted that I had not labelled the jumper positions as "MTX500", "MTX512" and "RS128", so you need to know what the correct link position is for the machi...

And what's more - it even works !

This is Martin's board, assembled and running MAGROM software version 1.0

The PCB has been manufactured !

If it is "cemented in", that would be a first! Remove both end plates and inspect between the bottom of the PCB and the base of the case, there should be about 5mm of a gap. If you hold it up to eye level, you should be able to see underneath the board. The rubber insulator mentioned earli...

A question that I know you have answered already, but, just to be sure . . . You have removed the single bolt that goes through the bottom of the case, through the regulator and onto the heatsink? And, just to clarify, the regulator heat sink sits in a gap in the plastic rear panel, they both need t...

OK, sorry, meant to e-mail it, but

you can download it from here :-

http://www.primrosebank.net/computers/m ... txplus.htm

the link is about half way down the page

regards
Dave

Hi Guys,

Lez has placed the order now, as the parts are coming from China, it may well be a few weeks before they arrive and I can distribute them

regards
Dave

Certainly! - put me at the top of the list . . .

Once you have ironed out the wrinkles in the design

Aaah, does that mean that you're about to ship the FDX after all?