*** M E M O R U M ***

Hi Mark,

yes, there should be - I was thinking of that too.

(The fit might be different depending on whether the board had the internal connector fitted too)

We'll just have to see what our 3D modelling expert offers up next

regards
Dave

Maybe we should give some more thought to how it would attach to the MTX too. On Version 2 of the SDX, Memotech fitted a plate on the bottom of the case and the drive to bolt them together, but, not wanting to drill the MTX case, that's not appropriate for this case. Incidentally, Memotech replaced ...

Nice case too - just missing a bit of "Sharpie" black marker and a logo

And, just for fun . . . .

With a little "photo-shopping" . . . .

As I mentioned, the base printed with a little warping, it doesn't cause too much of a problem and may be better if printed again

The finished article

Base printed now too.
The model is fine, the PLA that I am using or maybe my printer, means that the base has a little "warp" in it. It think that it will work fine though. Maybe a professional printer or other material would give a flatter product, but even this one is pretty good

Actually, it's more just exercising the keys. Really work them hard, many many times, they will get better with LOTS of use. You should be able to recover most, if not all of them, if one or two are beyond help, then you can replace the key as described on this page http://primrosebank.net/computers...

see the brief notes about half way down this page . . .

http://primrosebank.net/computers/mtx/mtxmaint.htm

regards
Dave

As I said, I have been out most of the day and only had a very quick look at it before I went to bed, but it looks like it matches up perfectly !

regards
Dave