Page 1 of 1

Can't change to MTX Basic

Posted: 18 Dec 2013 18:34
by AndyGarton
Hi guys, there's a strong chance this is user error as I've only just started using my REMEMOrizer, but it starts up fine in CP/M via the VGA connection, but when I type "MTXL" to (I think!) switch to BASIC, I get "No file, changing to MTX512 status" with a stuck flashing cursor. No display appears on my TV, and I think I've tuned it in correctly (it was working before on this TV before I installed the REMEMOrizer).

Help appreciated!

Cheers,
Andy

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 18:59
by Dave
Hi Andy,

you are using the MTX output, rather than REMEMOrizer VGA output, at that point are you?

The "No File" just means that you have not selected a game file to run on the CP/M command line, it should still drop to the normal "Ready" prompt on the 40 coulmn screen, ie., the MTX TV or Composite Video output

regards
Dave

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 19:35
by AndyGarton
Thanks Dave - I have the REMEMOrizer connected to a monitor via VGA, and the MTX itself connected to a TV via an RF lead, is that what you mean?

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 19:43
by AndyGarton
Ok so I had the bright idea (!) of disconnecting the REMEMOrizer and just trying the TV, and I can't get a picture. So it's nothing to do with REMEMOrizer. Unsure exactly what to try next though.

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 19:50
by AndyGarton
Sorted now! I was being a muppet, and am too ashamed to post the details.

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 19:53
by Dave
Glad you're sorted, we won't press you for the details :-)

regards
Dave

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 22:16
by 1024MAK
Go on, get your dirty laundry out in public :lol:

We won't laugh any more than we are now Image

Let me see, composite video plugged into the wrong socket on either the MTX (in the audio "Hi-Fi" output) or the telly,
trying to use composite video from the MTX, but have the TV switched to the UHF aerial/tuner mode,
trying to use the UHF aerial/tuner input, but have the telly switched to the Aux / composite video input,
not actually having the same lead plugged into both the MTX and the telly!

And of course, when the MTX switches to it's internal VDP, the display on the VGA "freezes" making you think that there is a problem.

Don't worry, I have either done some of these things myself, or have see someone else do something similar :roll: :lol:

So spill the beans :mrgreen:

Mark

Re: Can't change to MTX Basic

Posted: 18 Dec 2013 22:23
by AndyGarton
Great guess Mark! Composite output from MTX plugged into tuner input on the telly. Oops.