CFX-II first pictures

Modern, Memotech inspired, hardware projects
User avatar
Crazyboss
Site Admin
Posts: 180
Joined: 09 Aug 2012, 21:45
Location: Sweden
Contact:

Re: CFX-II first pictures

Postby Crazyboss » 10 Apr 2017, 09:09

would this system support any size of CF flash card? - might be a problem later to find SD cards which work with the Rememorizer :shock:

if you use a SD to CF adaptor, would this system be compatible with the rememorizer sd cards?
//CLAUS - Webmaster at www.mtxworld.dk

User avatar
Dave
Posts: 573
Joined: 11 Aug 2012, 18:16
Contact:

Re: CFX-II first pictures

Postby Dave » 10 Apr 2017, 10:41

CFXCompare.png
CFXCompare.png (24.65 KiB) Viewed 341 times

User avatar
Dave
Posts: 573
Joined: 11 Aug 2012, 18:16
Contact:

Re: CFX-II first pictures

Postby Dave » 10 Apr 2017, 10:45

Only 64MB will ever be usable - 8 x 8MB partitions, with any 4 visible at one time

I have tested with 4GB CF cards, larger cards should not be a problem, but untested by me

User avatar
Crazyboss
Site Admin
Posts: 180
Joined: 09 Aug 2012, 21:45
Location: Sweden
Contact:

Re: CFX-II first pictures

Postby Crazyboss » 11 Apr 2017, 10:25

great just what i what i needed.

Is it hextrain compatible ?

Is the R/W speed the same as at the Remeorizer?

Could it be possible to emulate the VDP and send the signal to the VGA port ?
//CLAUS - Webmaster at www.mtxworld.dk

Martin A
Posts: 264
Joined: 09 Nov 2013, 21:03

Re: CFX-II first pictures

Postby Martin A » 15 Apr 2017, 21:46

SD to CF adapters work with the CFX, as that is a 16 bit interface. I don't expect them to work with 8 bit interface on the CFX-II. The one I have doesn't.

According to the ATA-ATAPI standard, 8 bit transfer mode only applies to CF cards, SD cards aren't mentioned.


Return to “NEW HARDWARE”

Who is online

Users browsing this forum: No registered users and 1 guest