Page 1 of 1
The finished "product"
Posted: 21 Feb 2014 22:27
by Dave
The PCB has been manufactured !
- pcb_cs_400.jpg (160.88 KiB) Viewed 34083 times
- pcb_ss._400jpg.jpg (156.06 KiB) Viewed 34083 times
Re: The finished "product"
Posted: 21 Feb 2014 22:29
by Dave
And what's more - it even works !
This is Martin's board, assembled and running MAGROM software version 1.0
- Working_pcb_ma.jpg (81.8 KiB) Viewed 34082 times
Re: The finished "product"
Posted: 21 Feb 2014 22:33
by Dave
So, my first forray into PCB manufacture seems to have been a success . . . .
One small "glitch", Martin spotted that I had not labelled the jumper positions as "MTX500", "MTX512" and "RS128", so you need to know what the correct link position is for the machine that you are connecting too. But, all-in-all, I'm pretty happy with how this has worked out
regards
Dave
Re: The finished "product"
Posted: 22 Feb 2014 02:16
by 1024MAK
Re: The finished "product"
Posted: 22 Feb 2014 03:11
by Dave
Hi Mark,
I'll include your free sample with the two you were going to buy . . . .
Oh, I forgot to mention, the price has gone up by 50%
