Bought another mtx online.

Post Reply
User avatar
Crazyboss
Site Admin
Posts: 274
Joined: 09 Aug 2012 21:45
Location: Sweden
Contact:

Bought another mtx online.

Post by Crazyboss »

I bought another mtx512 online, untested. I got it for a fair price, but it was not what I hoped for. It seems like it have been stored some where, rain or some liquid have clearly been at that computer. But all the key Caps and the main board is complete.
IMG_20200810_164234.jpg
IMG_20200810_164234.jpg (1.58 MiB) Viewed 3704 times
IMG_20200810_163416.jpg
IMG_20200810_163416.jpg (2.35 MiB) Viewed 3704 times
IMG_20200810_163430.jpg
IMG_20200810_163430.jpg (2.3 MiB) Viewed 3704 times
IMG_20200810_163447.jpg
IMG_20200810_163447.jpg (1.54 MiB) Viewed 3704 times
IMG_20200810_163506.jpg
IMG_20200810_163506.jpg (1.86 MiB) Viewed 3704 times
IMG_20200810_164234.jpg
IMG_20200810_164234.jpg (1.58 MiB) Viewed 3704 times
Attachments
IMG_20200810_163405.jpg
IMG_20200810_163405.jpg (2.29 MiB) Viewed 3704 times
//CLAUS - Webmaster at www.mtxworld.dk
User avatar
Dave
Posts: 1280
Joined: 11 Aug 2012 18:16
Contact:

Re: Bought another mtx online.

Post by Dave »

Hi Claus,

the keyboard is ugly :lol:

I got one in for repair that looked a lot like that : http://primrosebank.net/computers/mtx/r ... darren.htm

As you'll know, to get the metal plate cleaned up properly would really require that all the keys were unsoldered from the PCB, which is not really practical. I was able to clean most of the rust off from the front side (leaving a few scratches along the way). Access is easier if you take the assembly out of the upper part of the shell.

Most of the keyswitches were OK, but I did need to change a few of them. Hopefully, your keys will be OK

regards
Dave
User avatar
Crazyboss
Site Admin
Posts: 274
Joined: 09 Aug 2012 21:45
Location: Sweden
Contact:

Re: Bought another mtx online.

Post by Crazyboss »

Not sure what happends with the diods there ? - somebody did a very bad solder job, or something very bad happend there!. Its a future project, not for now not sure when i will get to that one.
//CLAUS - Webmaster at www.mtxworld.dk
Post Reply