*** M E M O R U M ***

Soldered in Memotech memory boards don’t need to be a barrier to MFX!

Memotech frequently made MTX512s out of MTX500 computer boards by adding a RAM expansion card inside the case. Some were push fit edge connectors, in other cases, Memotech soldered the RAM board in place. This makes it difficult to install alternative expansion boards such as MFX.

However, it doesn’t need to be a show stopper! The latest MFX customer unsoldered the memory expansion without too much difficulty and was able to install MFX.

Another satisfied customer

What da yah mean? An angle grinder or jigsaw can quickly separate those RAM boards from the main board

And you appear not to have posted the "after" photo

Mark

1024MAK wrote: ↑29 Aug 2024 20:44 What da yah mean? An angle grinder or jigsaw can quickly separate those RAM boards from the main board

And you appear not to have posted the "after" photo

Mark

Ha-ha, that may have been the tools that Jason used

Unfortunately, I don’t have an after photo - Jason . . .?