This is the top of the connector:
And a zoom in:
Search found 32 matches
- 18 Apr 2021 22:10
- Forum: HARDWARE
- Topic: Edge connector woes
- Replies: 8
- Views: 7103
- 18 Apr 2021 13:03
- Forum: CP/M
- Topic: C compiler
- Replies: 7
- Views: 13437
C compiler
Hi all Having decided to learn C I figured it would be a good use of my new 512, otherwise I will just end up playing a few games and then it will end up in a cupboard. I’m looking for a C compiler for CP/M for my 512 with a REMEMorizer (the 80 by 48 column display is awesome!). Ideally it needs to ...
- 18 Apr 2021 12:45
- Forum: HARDWARE
- Topic: Edge connector woes
- Replies: 8
- Views: 7103
Re: Edge connector woes
Thanks Dave. Looks like precision work which is not really my forte! However I do have some reading glasses on order so that should help a little. I might see if I can get someone to make up an extender first though. Unfortunately given my lack of desk space I have to share fun computers with my wor...
- 18 Apr 2021 11:19
- Forum: HARDWARE
- Topic: Edge connector woes
- Replies: 8
- Views: 7103
Re: Edge connector woes
Quick sketch:
The Rememorizer has a relatively small connection footprint looking inside it but the edge connector extender that I got for my Spectrum has a much larger connection footprint.
The Rememorizer has a relatively small connection footprint looking inside it but the edge connector extender that I got for my Spectrum has a much larger connection footprint.
- 18 Apr 2021 11:00
- Forum: HARDWARE
- Topic: Edge connector woes
- Replies: 8
- Views: 7103
Edge connector woes
I have recently acquired a 512 and a Rememorizer but am struggling with the Rememorizer a bit. When I plug it in it has to be in a VERY exact position to work - only plugged in about 1/3 of the way. Unless in this position it either gets no lights on the board at boot or just two reds that don’t cha...
- 18 Apr 2021 10:54
- Forum: HARDWARE
- Topic: Take care when remove ics (Saved a VDP)
- Replies: 6
- Views: 7391
Re: Take care when remove ics (Saved a VDP)
Wow. I’ve pulled quite a few socketed chips over the years and never broken a pin so it never even crossed my mind it was a risk! Thanks for the warning.
- 11 Apr 2021 14:26
- Forum: INTRODUCE YOURSELF
- Topic: Hello from Chesterfield
- Replies: 14
- Views: 11901
Re: Hello from Chesterfield
I just found an old 40 pin cable, which seems to be working fine and adding a nice splash of colour:
- 11 Apr 2021 09:24
- Forum: INTRODUCE YOURSELF
- Topic: Hello from Chesterfield
- Replies: 14
- Views: 11901
Re: Hello from Chesterfield
I've just last week done the same thing, I used an old Xbox (first one) IDE cable which worked. It was too long so I bought a raspberry pi GPIO ribbon cable and it's a little bit longer than the original cable and works fine. I have ordered a set of DuPonts but think I have one of those lying aroun...
- 10 Apr 2021 23:45
- Forum: INTRODUCE YOURSELF
- Topic: Hello from Chesterfield
- Replies: 14
- Views: 11901
Re: Hello from Chesterfield
Well, nearly in business. In spite of being careful the keyboard ribbon has given up so I will have to replace that. Time to order some DuPont leads I guess.
- 10 Apr 2021 22:15
- Forum: INTRODUCE YOURSELF
- Topic: Hello from Chesterfield
- Replies: 14
- Views: 11901
Re: Hello from Chesterfield
Looks like I’m in business!