ROTT 1600

Modern, Memotech inspired, hardware projects
Post Reply
Martin A
Posts: 797
Joined: 09 Nov 2013 21:03

ROTT 1600

Post by Martin A »

I've basically finished putting the extra components onto the memory board I build for Fuzix testing.

It's time to introduce the ROTT 1600k memory board.
Lots of storage
Lots of storage
rott 1600.jpg (331.81 KiB) Viewed 4741 times
Currently fitted is
a CFX style 16 bit IDE interface
2 x 512k srams, of which 448k can be seen from basic and 720k in CPM. (making 512k and 784k in total)
1 x 512k flash rom loaded with a Magrom style games system in rom slot 3
1 x 128k flash rom currently fitted with 32k ROM Newword in rom slot 2, but could equally hold Pascal or Videowall software, or another 512k Magrom
1 x 32k of rom holding the CPM boot rom in slot 4, SDX basic extensions in slot 5 and 8k free in slot 6. plus the 8 diagnostics rom. (I've fitted in a 128k flash as that was cheaper than a 32k eeprom!)

Theoretical maximum capacity is 4 x 512k and 1 x 32k devices for 2080k or just over 2 meg. As fitted it has 3 x 512k and 2 x 32k, hence the 1600 in the name.

The CF interface is identical to the CFX in use so adds the usual up to 8, 8meg partitions.

And the name

Ridiculously Over The Top.

Now who was it thought 640k was enough memory for anyone ?

As usual there's no proper circuit diagram, just a back of the board pin to pin wiring guide
ROTT layout.pdf
Layout of the various devices
(228.74 KiB) Downloaded 466 times
Last edited by Martin A on 07 Jul 2019 10:15, edited 1 time in total.
User avatar
1024MAK
Posts: 757
Joined: 24 Dec 2012 03:01
Location: Looking forward to summer, in Somerset, UK

Re: ROTT 1600

Post by 1024MAK »

Or ROTTon name :lol:

Good luck with testing :D

Mark
:!: Standby alert :!:
“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer in Somerset later in the year :D

Not as many MTXs as Dave! :lol:
Post Reply