Hustle Chumy (Sega SG-1000 conversion)

Include new and ported/converted games, and old games/tools. Subjects about CP/M software goes in the CP/M Forum.
Post Reply
User avatar
Crazyboss
Site Admin
Posts: 232
Joined: 09 Aug 2012 21:45
Location: Sweden
Contact:

Hustle Chumy (Sega SG-1000 conversion)

Post by Crazyboss » 01 Nov 2018 20:56

Hustle Chumy (Sega SG-1000 conversion) is now available for download at http://www.mtxworld.dk/download.php

Available as Wave (RAR compressed, for loading into your Memotech TAPE-JACK), BAS,RUN,MTX and CP/M COM file.

There is a quite good Manual/FAQ/Walkthrough online https://gamefaqs.gamespot.com/sg1000/91 ... faqs/76377

If you want to see the checksum for the game you hold down "HOME" while the game show "Decompressing...." when you see the Ascii letters start to cycle in the top/left corner you release "HOME" again.
Hustle Chumy MTX1.png
Hustle Chumy MTX1.png (55.7 KiB) Viewed 756 times
Hustle Chumy MTX2.png
Hustle Chumy MTX2.png (30.53 KiB) Viewed 756 times
Hustle Chumy MTX3.png
Hustle Chumy MTX3.png (29.57 KiB) Viewed 756 times
Hustle Chumy MTX4.png
Hustle Chumy MTX4.png (29.83 KiB) Viewed 756 times
Hustle Chumy MTX5.png
Hustle Chumy MTX5.png (29.95 KiB) Viewed 756 times
//CLAUS - Webmaster at www.mtxworld.dk

User avatar
Dave
Posts: 752
Joined: 11 Aug 2012 18:16
Contact:

Re: Hustle Chumy (Sega SG-1000 conversion)

Post by Dave » 01 Nov 2018 21:17

Well done Claus!

not tried it yet, but it's good to see another game appearing

regards
Dave

User avatar
Crazyboss
Site Admin
Posts: 232
Joined: 09 Aug 2012 21:45
Location: Sweden
Contact:

Re: Hustle Chumy (Sega SG-1000 conversion)

Post by Crazyboss » 01 Nov 2018 21:48

Yes I have been quite Lazy doing those :)

But also my Memotech gear have been store away for some time, and then i had problems to get the files to a SD Card.

I actually ended up installing Oracle VM and install a XP Virtual on my Windows 7. From the WIndows XP I can transfer the files using CPMCBFS :)

I always do some tests on real hardware, even MEMU do a very good job :)

And Fixed a RETI bug in Memu, I remember in the first versions of Memu, I could run my PACMAN conversion, but it freeze at real hardware, seems back then MEMU was ok with a RET from an Interrupt, but it have to be RETI, acutally I made the same mistake with this new converted game, this time Memu freeze and i canged to RETI and then it worked :) So memu is quite good.
//CLAUS - Webmaster at www.mtxworld.dk

User avatar
thewiz
Posts: 121
Joined: 12 Aug 2012 16:08

Re: Hustle Chumy (Sega SG-1000 conversion)

Post by thewiz » 02 Nov 2018 14:34

That looks great. Can't wait to try it out.
THIS is what Memotech is doing now.

Post Reply